spec no: dsad1012 rev no: v.3 date: mar/20/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp: 1203002406 3.2x1.6mm smd chip led lamp features 3.2mmx1.6mm smt led,1.05mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. vavrious colors and lens types available . package : 2000pcs / reel. rohs compliant. package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subject to change without notice. APTR3216SGC super bright green description the super bright green source color devices are made with gallium phosphide green light emitting diode.
spec no: dsad1012 rev no: v.3 date: mar/20/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp: 1203002406 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 APTR3216SGC super bright green (gap) water clear 4 15 120 symbol parameter device typ. max. test conditions units peak peak wavelength super bright green 565 nm i f =20ma d dominant wavelength super bright green 568 nm i f =20ma ? 1/2 spectral line half - width super bright green 30 nm i f =20ma c capacitance super bright green 15 pf v f =0v;f=1mhz v f forward voltage super bright green 2.2 2.5 v i f =20ma i r reverse current super bright green 10 ua v r = 5v parameter super bright green units power dissipation 105 mw dc forward current 25 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsad1012 rev no: v.3 date: mar/20/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp: 1203002406 super bright green APTR3216SGC
spec no: dsad1012 rev no: v.3 date: mar/20/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp: 1203002406 recommended soldering pattern (units : mm) tape specifications (units : mm) APTR3216SGC remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
